DJ16OT.9
 
     DTMF Wild Card function:
 
     If you forget a squelch or paging code, you can pick up and decode codes
sent by others.  Use [f] [DSQ set] to set DSQ first to 000.0.0 and then set it
 to
###.0.0.  (upside down A's will be displayed instead of #'s).
Now set your radio to G DSQ mode.  If you receive ANY valid page, the radio will
beep.  Press [f] [DSQ set] and the ###.0.0 display will be replaced by the page
code you just received.
 
 
 
     DTMF Decode function:
 
     At any time, any codes received will be decoded and kept in the M3 dialing
number.  Thus, any time you hear a bunch of DTMF codes on the air, you can press
the [Dial Ch] button, then rotate the top selector know so that M3 is displayed,
then use the up and down arrow buttons (* and #) to scroll the display right (up
arrow) or left (down arrow).  Up to 16 digits will be retained.  You can also 
set
the radio to DSQ mode while lying in wait to receive DTMF tones.  That way, the
radio will break squelch when it has received three or more DTMF tones, alerting
you to the fact it has captured a code.   Note: according to the manual, you 
must
have phone numbers stored in one or both dial memories (M1 and M2) for the 
decode
to work.  But in my experience that does not seem to be required by my unit.

END OF SERIES.