FT1000

OUT OF BAND MOD

1. REMOVE POWER AND ANT.
2. OPEN CASE TOP AND BOTTOM.
3. LOCATE FOUR SCREWS ATTACHING FROUNT PANEL AND REMOVE THE TOP SCREWS.
   LOOSEN THE BOTTOM SCREWS.
4. TILT FROUNT PANEL FORWARD.
5. ON THE LEFT SIDE OF THE RADIO, REMOVE THE PLUG FROM POWER SUPPLY TO
   THE FROUNT PANEL. (GRAY AND WHITE WIRES.)
6. LOCATE THE JUMPER POSITION 3 ON CONTROL BOARD.
7. CHANGE THE JUMPER STATUS IN POSITION 3.
8. REASSEMBLE RADIO.
9. RESET CPU.