ic2410.2

CROSS-BAND REPEAT (An edited version from an ICOM info sheet)

1.) Set frequencies for both UHF and VHF.  If necessary, set transmit offset
and tone.

2.) Hold the "BAND" switch and the "SET" switch.  The memory number display
will flash the letter "L".  This indicates the 2410 is in the "Mini Repeater"
mode.

3.) Transmission by PTT is possible.  If PTT is operated, the band which
is indicated by the flashing decimal point will be transmitted on.  This
can be done even when in "Mini Repeat" mode.  In other words, PTT has
priority over the "Mini Repeat" operation.

Transmitted band will be switched by the "UP" or "DN" key on the microphone.
The flashing decimal point will indicate which band will be transmitted on.

4.) Mini Repeater function will remain even when power is turned off.
To disable repeater function, hold the "SET" key until the flashing "L"
disappears.