R7000.14

 Bulletin #:    35187-001

 Subject:       Audio becomes distorted (clipped) when the radio
                is warm.  The period of time required for this
                problem to become evident varies depending on the
                ambient temperature.  This problem may not be evi-
                dent at low audio levels.

 Procedure

      Write to ICOM's customer service department for a copy of
      this service bulletin.


 Bulletin #:    35887-003

 Subject:       The remote relay sometimes stays energized after a
                signal is no longer present.  The radio must be
                turned off and back on to clear this situation
                before the modification.

 Procedure

  1.  Remove the covers from the radio and remove the main circuit
      board on the side of the radio.

  2.  Cut the trace between the base of Q5 and R106 on the foil
      side of the main board.

  3.  Install a RD6A diode (this part is critical and must be ob-
      tained from ICOM) with its cathode toward R106 across the
      cut in the trace.

  4.  Reinstall the board and insure mechanical clearance of the
      new diode.

  5.  Verify proper operation of the recorder function.

CONTINUED IN R7000.15