TM321A Date: Mon, 25 Sep 89 14:38:05 EDT From: rfc@philabs.Philips.Com (Robert Casey) To: mbramwel@uwo.ca TM321A Mars/cap mod from WM8J msgID 2846_wa2rkn To give the TM321 tx coverage from (142 0r 143, don't remember which) to 151.995 mhz, remove the top cover. Look for a loop of wire comming from the display area (the board with the CPU) and going right back. Cutting this wire and then doing a CPU reset is all you need to do. Takes about 2 minutes. Be sure that the ends of the wire don't short to something. 73s Note: I haven't tried this, proceed at your own risk! WA2ISE