TS940.8

TS-940S - SUBSCRIBER'S INQUIRY REGARDING USE OF ADDITIONAL
RECVR.
For one of your upcoming issues, I would be most interested
in getting information on how to use an additional receiver
at the same time as the TS-940S is in operation (receiving,
of course).  (ED Note:  We covered adding another receiver to
930, Issue 59, Page 54.)  The User's Manual covers use of an
additional receiver in lieu of the receiver of the 940
receiver section.  I am the owener of a 75A4 which I've
modified and updated over the 30 years I've had the receiver,
and I find no other receiver comparable to it in many most
significant ways.  So I would very much like to know how to
connect the 75A4 into the TS-940S for use simultaneously with
the receive section of the latter.  If this subject has
already been covered in a previous newsletter, please tell me
how to get a copy.  (ED Note:  Nothing published on this in
back issues.)  I'm confused as to whether I need to cut diode
130 and 135 on digital Unit B in order for the Xcvr to
operate over the same frequency range as the receiver.
Somewhere I noted that only diode 130 need be cut.  (ED Note:
Kenwood Newsletter No. 54 clearly states:  D135 is for MARS
frequency only.  D130 is for Gen.Cover- age Transmit.)
    RELAYED  BY..N0KGX...GENE