405 rear suspension question
From: Bob Bruce (bobbruce@mts.net)
Date: Mon 02 Dec 2002 - 09:14:52 EST
I am installing grease nipples in the trailing arms on a 405
I drilled through the steel and about 1/4" in there is a gap and then white plastic
which is about 3/16" thick.
So the question is how far in sould I drill so as to do the best job of lubing the bearings?
This archive was generated by hypermail 2.1.4 : Mon 02 Dec 2002 - 09:15:51 EST