Re: 405 rear suspension question
From: coupe404 (tippett@pacificcoast.net)
Date: Mon 02 Dec 2002 - 10:41:56 EST
--- In peugeot-L@y..., "Bob Bruce" <bobbruce@m...> wrote:
> I drilled through the steel and about 1/4" in there is a gap and
then white plastic which is about 3/16" thick.
Stop drilling now; it is that very gap that you have to fill with
grease. It'll take at least one full standard tube of grease per
side to fill it up. The nylon sleeve is mounted on the crossmember
and you do nt need/want to drill into it.
This archive was generated by hypermail 2.1.4 : Mon 02 Dec 2002 - 10:42:22 EST