Re: Re: 405 rear suspension question
From: firepiston@juno.com
Date: Mon 02 Dec 2002 - 11:21:57 EST
If anyone needs a good rear torsion bar for the 405 I've got one with 50K
on it.
On Mon, 02 Dec 2002 15:41:56 -0000 "coupe404" <tippett@pacificcoast.net>
writes:
> --- In peugeot-L@y..., "Bob Bruce" <bobbruce@m...> wrote:
> > I drilled through the steel and about 1/4" in there is a gap and
> then white plastic which is about 3/16" thick.
>
> Stop drilling now; it is that very gap that you have to fill with
> grease. It'll take at least one full standard tube of grease per
> side to fill it up. The nylon sleeve is mounted on the crossmember
>
> and you do nt need/want to drill into it.
>
> Mike Tippett
> 404 Coupé Injection
> MB C230K
> 405
>
>
> Recommended format for your email subject lines:
> Model # [Model Letters] Year Subject
>
> Examples:
> 505 88 V6 Mileage
> 405 Mi16 89 Ignition Coil source?
> ************************************************
> To unsubscribe from this list send a blank email message to
> PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
> ************************************************
>
>
> Your use of Yahoo! Groups is subject to
This archive was generated by hypermail 2.1.4 : Mon 02 Dec 2002 - 11:45:24 EST