obviously the XD2/XD2S (stroke 83 mm) crank is
geometrically different from the XD3/xd3T crank
(stroke 90 mm)
Xavi
--- Senen Racki <Senen@home.com> wrote:
> I've turbo charged an XD2C using parts from an XD2S,
> but can't speak for the
> XD3T. You can swap cranks between XD2 and XD2S, but
> the connecting rods
> would have to be swapped too. The crank dimensions
> are the same, as are the
> main bearings, but the connecting rod bearings are
> substantially beefier on
> the XD2S. Also, because the XD2S has lower
> compression, the crank may have
> a shorter through, or shorter rods. Be careful when
> mixing parts...
>
> Senen.
>
> >wheel is mounted with 7 bolts. Can that be true?
> Maybe he means 8. Anyway
> my
> >question is can you change the the cranks between a
> XD2 and XD2S or XD3T.
> >I suspect that the XD3t would have a different
> crank.
>
>
> Recommended format for your email subject lines:
> Model # [Model Letters] Year Subject
>
> Examples:
> 505 88 V6 Mileage
> 405 Mi16 89 Ignition Coil source?
> ************************************************
> To unsubscribe from this list send a blank email
> message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
> ************************************************
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
This archive was generated by hypermail 2b29 : Thu 31 May 2001 - 09:59:16 UTC