Re: heater hose for 604
From: Charles Lincoln (charlie.lincoln@gmail.com)
Date: Mon 26 May 2008 - 13:32:39 EDT
If the heater hose id & pipe od match up, copper plumbing pipe & hose clamps
have handled couplings and (depending on your solder sweat joint skills)
bends. - Charlie
On 05/25/2008 12:17 PM, "Bob Bruce" <bobbruce@mts.net> wrote:
>
> Gates and Goodyear and the other hose guys make a lot of aftermarket stuff
> they have catalogues with pictures ...maybe even online
> measure your internal diameter, probably 16 mm or 5/8" same thing
> Most likely you will find something at the local auto parts store
> you may well have to join a couple together
> If you can get metal hose splicers
> I have found the plastic especially the grey ones are not up to the high
> temperature
>
> Bob
>
> From: am864u
> Sent: Sunday, May 25, 2008 12:54 PM
> To: peugeot-L@yahoogroups.com <mailto:peugeot-L%40yahoogroups.com>
> Subject: [Peugeot-L] heater hose for 604
>
> Hi,
> The hose that goes from the head to the heater control valve in my
> 1984 604 TD split close to the place where it connects to the head. I
> was simply going to splice in a new piece of hose, but upon inspection
> the length of hose in the engine bay has many surface cracks. I
> contacted Brian Holm, but he doesnt have the hose. There are some
> bends and curli Q's in the hose, otherwise, I would have already
> replaced it with regular hose. Anyone have this part or have any
> thoughts?
>
> Thanks
> David
------------------------------------
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
************************************************
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@YAHOOGROUPS.COM
************************************************
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> Your email settings:
This archive was generated by hypermail 2.1.4 : Mon 26 May 2008 - 12:48:25 EDT