> In a message dated 97-07-18 12:03:29 EDT, you write:
> Am I getting this right? There are three options in this setup and H-4, H-1
> and a city light driving bulb. If so, I presume that I will have to rig
> something up to allow me to choose between the 3 options.
The simplest approach is to ignore the H1 and city bulb and just adapt the
H4 to the 9004 plug with a pigtail. H4 has hi/lo beam already and will
simply replace the headlamps you have..
The city light uses a strange plug but plain fastons can be used to wire
it in parallel with the parking lamps.
The H1 bulb is is in the driving light part of the reflector and is an
extra beam you could ignore if you wish. Wired in, it would be pencil beam
driving lamps. You could wire to run anytime the Hi Beams are on but a
relay would be needed to keep from overloading the lamp switch.
Some months ago, I listed a scheme to make the foglamp switch activate
the fogs in low beam and the driving lamps in high beam, all from one
switch. See the archive for that.
-Jim