What sent you to check the continuity of the switches?
To get to the windows, the door panel must come off. Be gentle,
you do not want to destroy the plastic retaining plugs. Also remove the
plastic. Be careful here also, you want to re-use it. A 10mm wrench
will be required to remove the three nuts securing the power window
motor. You may also have to loosen the 10 mm nuts that hold the window
regulator to the door panel in order to remove the motor. Most likely,
the motor has gone to the great Peugeot Graveyard.
Good luck
Ray
> --------
> From: Thaddeus
> Dabrowski[SMTP:T_Dabrowski@auxcom.aux.umass.edu]
> Sent: Monday, June 01, 1998 4:38 PM
> To: peugeot@padui.org
> Subject: '87 505 sedan N9TE windows not moving
>
> Hi
>
> The electric windows on my '87 505 seem to be frozen I've tested the
> switch with a VOM and there is continuity when there should be.
> Questions:
> 1. What else can be done before I tear the window apart?
> 2. What it the most efficient dis-assembly procedure?
> 3. What tools should be gathered before I begin.
>
> thanks
>
> Thad Dabrowski
>
>
>