Fwd no 2: Re: 205 Gti Vibrations

tuve.hammer@notes.sema.se
Tue, 30 Jun 1998 15:44:35 +0200

---------------------- Forwarded by Tuve Hammer/TBG/Sema Group/SE on
98-06-30 15:39 ---------------------------

tuve.hammer@notes.sema.se on 98-06-29 11:16:15

To: peugeot@padui.org
cc: (bcc: Tuve Hammer/TBG/Sema Group/SE)
Subject: Fwd: Re: 205 Gti Vibrations

---------------------- Forwarded by Tuve Hammer/TBG/Sema Group/SE on
98-06-29 11:02 ---------------------------

Scot Thomas <scot@ihug.co.nz> on 98-06-27 10:56:05

To: Tuve Hammer/TBG/Sema Group/SE
cc:
Subject: Fwd: Re: 205 Gti Vibrations

>From: peugeot@p-cright.demon.co.uk (Peter Crighton)
>To: Scot Thomas <scot@ihug.co.nz>
>Subject: Re: 205 Gti Vibrations
>Date: Sun, 28 Jun 1998 18:48:21 GMT
>X-Mailer: Forte Agent 1.5/32.451
>
>On Thu, 25 Jun 1998 12:01:53 +1200, you wrote:
>
>>At 09:53 23/06/98 +0200, you wrote:
>>>Hi all!
>>>I have a 205 gti 1.9 -88 which starts to shake pretty hard when I floor
the
>>>gaspedal or do a hard engine brake. The vibrations is very similar to
when
>>>a front wheel is unbalanced, but this is not the problem. According to
>>>Haynes this can happen when there is a problem with bent or damaged
>>>driveshafts. But my driveshafts have been replaced by the former owner
>>>about 2 years ago, so they shouldn't be worn out yet. What else could be
>>>the problem? Are there any typical problems on these models which fits
the
>>>description above?
>>>
>>>Thanks
>>>Tuve
>>
>>If it does feel like a tire balance problem you could check your bearings
>>and the rest of your suspension setup. This should be in your Haynes
manual.
>>----------------------------------------------------------------------
>
>
>I was once told to keep an eye on the support for the driveshaft (it's
>on the right hand side as if it comes loose it causes problems (not
>sure whether it wrecks the gearbox or just falls out). It's not that
>loose is it?
>--
>
>Peter Crighton
>

Aaahhh! I replaced the faulty track rod linkage and now the vibrations has
almost disappeared!! It costed me about 13 US $ and took 15 minutes to
replace. Sometimes you get lucky....=)