Re: n9te

Jim Lill (jpl@vectorbd.com)
Wed, 9 Sep 1998 15:36:38 -0400 (Eastern Daylight Time)

On Wed, 9 Sep 1998, Francois Dion wrote:
>
> > . Even replacing the plugs looks relatively difficult.
>
> You have to remove the intercooler to have access tothem. Takes a few
> minutes.

If you do that, use care so as to not tear the large o-rings on the
intercooler inlet and throttle body. That would be a good time to
retorque the exhaust manifold nuts too. While you have the intercooler
off, degrease the inside with dome petrolium distillate or ?. Clean all
the "loose" oil outa of all the ducts and the throttle body too.